Skip to the content
TOTAL PRODUCT RECALL
CPSC #13090Sports & outdoors
A-Plus Marine high-pressure scuba diving air hose

A-Plus Marine Supply · Recalled

High-Pressure Scuba Diving Air Hoses Recalled by A-Plus Marine Due to Drowning Hazard

Drowning

The diving hose that connects the regulator to the tank's pressure gauge can separate reducing the available air supply to the diver, posing a drowning hazard.

Units
About 40
Reports
3
Injuries
—
Deaths
0
Price
$34
Remedy
Replace

Reports, injuries, deaths and price are read out of the notice’s wording by rules, so they can miss unusual phrasing. The official notice is the record.

Affected

The recalled air hoses are high-pressure scuba air hoses with a black, smooth rubber outer covering. They are about half a centimeter in diameter and 32 or 36 inches long. These hoses connect the regulator to the tank pressure gauge. The phrase "Scuba Diving High Pressure hose I.D. 3/16" (4.76 mm) W.P. 5000 PSI Exceeds SAE 100RT braid with Kevlar fiber from Dupont" is printed in white lettering on the hose's outer covering. The hoses have metal fittings on each end. "CE EN 250 230" is stamped on the female side of the fitting and "12Q1" on the male side.

The file

Sold at
Scuba diving retailers nationwide from April 2012 through June 2012 for about $34.
Product type
Scuba Diving/Water Activity Equipment
Made in
Taiwan
Recalled by
A-Plus Marine Supply, Inc., of Gulf Breeze, Fla.

Incident log

A-Plus has received three reports of hoses separating. No injuries have been reported.

What the notice says to do

Consumers should immediately stop using the hoses and contact A-Plus Marine for a free replacement hose.

A-Plus Marine; at (800) 352-2360, from 9 a.m. to 5 p.m. PT Monday through Friday, or online at www.aplusmarine.com and click on the recall notice on High Pressure Braided Hose Safety Recall. Consumers can also send an email to eric@aplusmarine.com for more information.

Open official CPSC notice ↗ (opens in a new tab)

Recall notice published by the U.S. Consumer Product Safety Commission. This site is independent: always confirm on the official notice before acting.

Notice first dated JAN 10 2013; last revised JAN 13 2015.

"CE EN 250 230" is stamped on the female fitting"12Q1" is stamped on the male fitting

All 2013 recalls · Back to the timeline