Skip to the content
TOTAL PRODUCT RECALL
CPSC #78056Other

NO MEMORY IMAGE ON FILE

Bernina · Recalled

Sewing Machine Quality Assurance Program Announced

Other hazard

See the official notice.

Units
Not stated
Reports
—
Injuries
—
Deaths
—
Price
—
Remedy
See notice

Reports, injuries, deaths and price are read out of the notice’s wording by rules, so they can miss unusual phrasing. The official notice is the record.

Affected

June 28, 1978 Release # 78-056 Sewing Machine Quality Assurance Program Announced WASHINGTON, D.C. (June 28)-- Bernina Sewing Machines of Switzerland, in cooperation with the U.S. Consumer Product Safety Commission (CPSC), today announced a voluntary corrective action program involving the Type 213 foot pedals of Bernina sewing machines manufactured between late 1969 and January, 1976. Sewing machine owners will be notified directly by the company and sent an easy- to-install kit, free of charge, to remedy the problem. The foot pedal (or speed regulator) of the sewing machine may overheat if a switch within the pedal remains in a "closed" position. This may increase the possibility of a short circuit or fire in the pedal. As a safety precaution, owners are urged to unplug the machine when not in use and to avoid placing foreign objects on or near the foot pedal. According to Bernina, no injuries have been reported in connection with the sewing machines sold with this foot pedal. To correct the overheating problem, Bernina is offering a thermally activated switch for all the Type 213 black foot pedals. This number is stamped on the bottom of the foot pedal. (Those pedals stamped with a blue "T" already contain the thermally activated switch.) Bernina is identifying and contacting the owners of these sewing machines by letter to advise them that the thermally activated switch should be installed without delay. In addition, Bernina retailers will assist any consumer having difficulty in replacing the switch and have posted in-store notices explaining the problem. Consumers with the Type 213 foot pedals should contact their local Bernina retailer or any of Bernina's four American distributors if they have not been notified by the company or if they have questions concerning the recall program. The four American distributors are: Larson Bernina Corporation, 2017 E. 38th Street, Minneapolis, MN 55407; Swiss-Bernina Inc., 534 W. Chestnut Street, Hinsdale, IL 60521; Bernina Sewing Machine Company, Inc., 70 Orchard Drive, North Salt Lake, UT 84054; and Bernina Distributors, Inc., 2401 S. Hill Street, Los Angeles, CA 90007

The file

Sold at
Not stated
Product type
Sewing Machines
Made in
Not stated
Recalled by
Bernina

Incident log

None stated.

What the notice says to do

See the official notice.

Open official CPSC notice ↗ (opens in a new tab)

Recall notice published by the U.S. Consumer Product Safety Commission. This site is independent: always confirm on the official notice before acting.

Notice first dated JUN 28 1978; last revised DEC 17 2014.

All 1978 recalls · Back to the timeline